- Uncontrolled fire can result in a catastrophe.
- Gas leaks may result in explosions without warning.
- Electro-magnetic pulses(EMP) destroy essential electronic equipment
- Leaking water causes considerable damage.
MCT Brattberg is the optimal multi-protection, multi-cable transit system.
If the Lycron insert blocks can be called the heart of the MCT Brattberg seal, then the modular system of combining the various parts could be called the brain. It is a simple yet highly flexible system which, combined with our ability to custom-build special seals for special applications, makes MCT Brattberg one of the world's most frequently chosen cable transit seals. PLANNING A SEAL
Choose the size and type of frame to fit your particular need. Then find out how many cables are to be included in that particular penetration. List their various diameters, and you can start planning the installation, calculating the size and numbers of insert blocks necessary to fill the frame. In addition to insert blocks and a mounting frame, each completed seal must contain stayplates between each row of blocks, a compression plate, and an endpacking. When cables, insert blocks and stayplates are in place, the compression plate is expanded, squeezing each pair of insert blocks around its cable, creating constant, firm pressure against the frame. Finally, the endpacking is installed. The seal is now ready for work.
THE PACKING SPACE
The compression plate and the endpacking occupy the entire width at the top of each frame, and 40 mm of the height. This is a constant throughout the entire Brattberg system. The interior room left over, inside the frame, is called the packing space. Sizes are found on .
It is through this area your penetrating cables or pipes are to be drawn and sealed. PREPARATIONS FOR THE FUTURE
In a Brattberg seal it is possible to plan for future additions. The system has built in "spare room". Solid insert blocks are used to fill out the packing space. They are easily replaced later on with modules holding new cables.
PRE-LUBRICATED LYCRON INSERT BLOCKS
The Lycron insert blocks are designed as halves. Each pair fits a specific range of cable dimensions with a tight grip and high precision.
The blocks are pre-lubricated for ease of installation and disassembly and come with over 80 different hole diameters to ensure a precision fit for the widest possible range of cable or pipe sizes.
Solid spare blocks come in 10 different sizes.
THE FRAMES
MCT Brattberg frames can be combined in vertical and/or horizontal multiples to accommodate as many cables or pipes as necessary to meet your particular need.
THE STAYPLATES
To increase stability and to secure mechanical anchorage within the frame, a specially designed stayplate is placed between each row of blocks.
The plates come in galvanized or stainless steel, aluminium or brass to suit different applications.
THE COMPRESSION PLATES
A compression plate is inserted on top of the blocks in every Brattberg seal. It contains a bolt which expands the device against the frame and compresses the blocks around the cables. This ensures firm and constant pressure against the frame.
THE ENDPACKING
Available in Lycron with galvanized or stainless steel fittings, the endpacking fits between the compression plate and the top of the frame, completing the seal.